Aux In Operation - Wörlein ELiTE line PL880 Manuel D'instructions

DELETE USB TRACK
Delete one Track:
1. During the USB stop mode, press the "DELETE" button on the remote control one time,
'DEL-T001' will show on the display.
2. Choose the desired track with the "DN" or "UP" buttons on the remote control.
3. Press the "DELETE" button again and choose with the "DN" or "UP" buttons on the
remote control "YES". "YES" will begin flashing.
4. Press the "DELETE" button to confirm delete.
Delete all tracks:
1. During the USB stop mode, press and hold the "DELETE" button for few seconds on the
remote control one time, 'DEL-A' will show on the display.
2. Press the "DELETE" button again and choose with the "DN" or "UP" buttons on the
remote control "YES". "YES" will begin flashing.
3. Press the "DELETE" button to confirm delete.
4. All tracks will be deleted.
Press "MODE" button to select the AUX mode. Insert the audio cable (not included) into the
matching 'AUX IN' socket of the unit (PL880).
Start the playback of the connected device and you can hear the sound in PL880.
During playing mode, press "MUTE" button on the remote control one time, the sound will not
be heard from the speakers and 'MUTE' will show on the display; press "MUTE" button or
"VOL +/-" or "EQ" button to cancel mute function and the sound can be heard again from the
speakers.
During playing mode, press "EQ" button to choose the different sound effect from
"POP/ CLASSIC /ROCK/ JAZZ / FLAT", you can choose the desired one.
During usual operation insert the earphone's cable (not included) into the matching
'PHONES' socket of the unit. Now you can hear the sound exported to your
earphones.
Note: Adjust the volume lever lower during the PHONES operation.
To prevent possible hearing damage, do not listen at high volume levels for long
periods.

AUX IN OPERATION

MUTE / EQ OPERATION
PHONES OPERATION
10
PL880 / English Instruction Manual