Philips SONICARE DiamondClean 9000 Manuel D'utilisation page 30

30
English
6 Wedge the screwdriver between the battery and the black
frame at the bottom of the internal components. Then pry
the screwdriver away from the battery to break the bottom of
the black frame.
7 Insert the screwdriver between the bottom of the battery and
the black frame to break the metal tab connecting the
battery to the green printed circuit board. This will release the
bottom end of the battery from the frame.
8 Grab the battery and pull it away from the internal
components to break the second metal battery tab.
Caution: Be aware of the sharp edges of the battery tabs so
as to avoid injury to your fingers.