Processing Guide - Kenwood triblade HB710 Série Instructions

l
Your hand blender is not
suitable for ice crushing.
l
If your blender gets blocked, unplug
before clearing.
4 After use release the speed button.
Unplug and press the release
2
buttons to remove the blender
shaft from the power handle.
to use the whisk
l
You can whip light ingredients such
as egg whites; cream and instant
desserts.
l
Don't whisk heavier mixtures such as
margarine and sugar - you'll damage
the whisk.
1 Push the wire whisk into the whisk
3
collar .
2 Fit the power handle to the whisk
collar. Push to lock.
3 Place your food in a bowl.
l
Don't whisk more than 4 egg whites
or 400ml ( 3 ⁄ pt) cream.
4
4 Plug in. To avoid splashing, press
speed 1 button. To whisk on a faster
speed press the Turbo button. Move
the whisk clockwise.
l
Don't let liquid get above the whisk
wires.
5 After use release the speed button,
unplug and dismantle.
to use the chopper (if
supplied)
l
You can chop meat, vegetables,
herbs, bread, biscuits and nuts.
l
Don't chop hard foods such as
coffee beans, ice cubes, spices or
chocolate - you'll damage the blade.
1 Remove any bones and cut food
into 1-2cm ( 1 ⁄
2
2 Fit the rubber ring base on the
bottom of the chopper bowl. (This
stops the bowl sliding on the
worktop.)
3 Fit the chopper blade over the pin in
4
the bowl .
4 Add your food.
5 Fit the chopper cover, turn and lock
5
.
6 Fit the power handle to the chopper
cover - push to lock.
7 Plug in. Hold the bowl steady. Then
press the turbo button. Alternatively
press the turbo button in short
bursts to achieve a pulsing action.
8 After use, unplug and dismantle.
-1") cubes.

processing guide

food
Meat
Herbs
Nuts
Bread
Hardboiled 3
eggs
Onions
to use the masher (if supplied)
l
The masher can be used to mash
cooked vegetables such as
potatoes, swede and carrot.
l
Don't mash hard or uncooked foods
- you may damage the unit.
1 Cook the vegetables and drain.
2 Fit the masher collar to the masher
foot by turning in a clockwise
6
drection
3 Turn the masher upside down and fit
the paddle over the central hub and
turn anti clockwise to locate
the collar isn't fitted then the
paddle doesn't secure in
place).
4 Fit the power handle to the masher
assembly - push to lock.
5 Plug in.
6 Place the masher in the saucepan or
bowl etc., and select speed 1. Move
the masher in an up and down
movement throughout the mix until
the desired result is achieved.
7 After use release the speed button
and unplug.
8 Press the blender shaft release
buttons to release the masher
assembly.
9 Remove the paddle from the masher
by turning clockwise.
10 Unscrew the collar from the masher
foot.
important
l
Never use the masher in a saucepan
over direct heat. Always remove the
saucepan from the heat and allow to
cool slightly.
l
Do not tap the masher on the side of
the cooking vessel during or after
mashing. Use a spatula to scrape
excess food away.
6
maximum approx. time
amount (in seconds)
250g (9 oz) 10-15
30g (1 oz) 10
200g (7 oz) 10-15
1 slice 5-10
3-5
200g (7 oz) pulse
.
7
. (If