Kenwood triblade HB710 Série Instructions page 11

For best results when mashing never
fill a saucepan etc., more than half
full with food.
to use the ice crusher
attachment
i e rushing
1 Fit the rubber ring base
bottom of the beaker. (This stops the
beaker sliding on the worktop).
2 Place the ice crusher bowl
the beaker.
3 Locate the ice crushing blade
the centre hole in the bottom of the
ice crusher bowl and press it down.
4 Add the ice cubes into the bowl. Do
not overfill the bowl and for best
result do not process more than
250g/9 oz (12 ice cubes) at a time.
5 Fit the ice crusher cover
lock .
6 Fit the power handle to the cover -
9
push to lock
7 Plug in. Hold the beaker steady.
Then press the turbo button.
Alternatively press the turbo button
in short bursts to achieve a pulsing
action.
8 After use, unplug and take apart for
cleaning.
chopping/blending in
1 liter beaker
1 Fit the rubber ring base
bottom of the beaker. (This stops the
beaker sliding on the worktop).
2 Fit the blade
of the beaker
3 Place the food in the beaker to be
blended.
4 Fit the ice crusher cover
bk
lock .
5 Fit the power handle to the cover -
bl
push to lock
6 Plug in. Hold the beaker steady.
Then press the turbo button.
Alternatively press the turbo button
in short bursts to achieve a pulsing
action.
7 After use, unplug and take apart for
cleaning.
8 After blending you can fit the lid
to the top of the beaker.
q
on the
n
l
, turn and
.
q
on the
o
over the centre pin
p
.
l
, turn and
.
into
m
to
r
7