Description Of The Device - therm-ic I-Pack Mono button B Mode D'emploi

INSTRUCTIONS FOR USE / ENGLISH
• If you discover that the connection cords,
batteries or other parts of the boot are
damaged, the heating function must not be
used. After removal of the batteries,
the boots can be used as an ordinary boots.
• Never attempt to remove the protective film
enclosing the batteries! There is a danger
of explosion if the lithium-ion batteries are
handled inappropriately.
• Batteries which have damaged protective
films must not be used and must be disposed
of as soon as possible.
• Do not modify this device and only use it for
its intended purpose. The parts of the device
and its connection cords should be repaired
by the manufacturer only.
• If you have questions or if there are any
problems with the device, please contact
your retailer or the manufacturer.
• Dispose of used batteries as required by
the regulations in your area.
• Do not throw batteries into a fire–risk of
explosion!
• The boots must never be machine washed or
hand washed.
• The drying temperature must not exceed
40 °C / 104 °F. Never dry the Boot
Integration System in a tumble dryer or on a
radiator.

DESCRIPTION OF THE DEVICE

Boot Integration System
• Heating level indicator light (1.1)
• Control zone with one button for the 3
heating levels (1.2)
• Boot Integration System charging connector
(1.3)
• Battery pockets (1.4)
8