Important; Instructions For Use And Description Of Functions - therm-ic I-Pack Mono button B Mode D'emploi

INSTRUCTIONS FOR USE / ENGLISH
mentioned above, the battery is already
charged at around 75% of its maximum
capacity (fast charging process). Lab test
done using Therm-ic USB wall plug universal
charger (optional).
Important advice:
• Recharge the batteries after each use to keep
them in good condition and to ensure the
Therm-ic Boot Integration System is always
ready for use.
• Each battery is made up of lithium-ion cells.
It can be recharged in any state of charge.
Consequently, it is not necessary to discharge
the batteries completely before recharging.

Important:

Never try to open a battery pack!
There is a risk of explosion if the lithium-ion
batteries are handled inappropriately.
There is also a risk of damaging the electronic
components of the Boot Integration System.
INSTRUCTIONS FOR USE AND DESCRIPTION
OF FUNCTIONS
The Therm-ic Boot Integration System has four
modes: OFF and LEVELS 1, 2 and 3.
These modes are indicated by a heating speed
indicator light (1.1).
The number of LED flashes displayed indicates
the heating level selected. The heating setting
of the Therm-ic Boot Integration System can
be set to 3 different levels (level 1, level 2 and
level 3) using the control zone, which consists
of a single button (1.2).
The Therm-ic Boot Integration System is off when
the LED heating level indicator light is not lit.
10