Miele A 865 Mode D'emploi page 34

en - Areas of application
34
To remove the cannulae from the 3F and MF syringes after repro-

cessing, press them down into the holder on the adapter.
Pull the cannulae from the 3F and MF syringes out of the spring

clips and then take them out of the holders.
 High spring force of compression spring
The spring force can cause the cannulae from the 3F and MF syr-
inges to jump out of the holder.
To unload the cannulae from the 3F and MF syringes, press down
on them and use the spring force to slowly pull the cannulae out of
the spring clips and then remove them from the holders.