Installing The Holder With Changeover Mechanism - Miele A 865 Mode D'emploi

Installing the
holder with
changeover
mechanism
Depending on the geometry of the 3F and MF syringes, the holder 
(highlighted in grey) can be installed rotated through 180°
(changeover mechanism).
Place the compression spring  inside the sleeve .

Push the holder  onto the compression spring  and fit the lid .

Screw the hex nut  onto the sleeve  as far as the stop.

Connect the spring clip  to the thread of the sleeve .

Holder facing downwards (changeover mechanism)
a
Lid
b
Holder
c
O-ring
d
Compression spring
e
Sleeve
f
Spring clip
g
Hex nut
en - Areas of application
31