Troubleshooting - TOOLWAY BOLTON PRO 192021 Mode D'emploi

ENGINE
Engine Will Not Start
1.Check contro
lpositions.
2. Check fuel.
3. Remove and
inspect spark plug.
4. Take engine to an
authorized servicing
dealer, or refer to shop
manual.
Engine Lacks
Power
1. Check air filter.
2. Check fuel.
3. Take engine to an
authorized servicing
dealer, or Refer to
shop manual.

TROUBLESHOOTING

Possible Cause
Fuel valve OFF.
Choke open.
Ignition switch OFF.
Out of fuel.
Bad fuel; pump stored
without treating or
draining gasoline, or
refuel with bad gasoline.
Spark plug faulty, fouled,
or improperly gapped.
Spark plug wet with fuel
(flooded engine).
Fuel filter clogged,
carburetor malfunction,
ignition malfunction,
valves stuck, etc.
Possible Cause
Air filter clogged.
Bad fuel; pump stored
without treating or draining
gasoline, or refuel with
bad gasoline.
Fuel filter clogged,
carburetor malfunction,
ignition malfunction,
valves stuck, etc.
28
Correction
Move fuel valve lever to ON
position.
Move choke lever to
CLOSED position unless
engine is warm.
Turn ignition switch to ON.
Refuel
Drain fuel tank and
carburetor.
Refuel with fresh gasoline
Gap or replace spark plug
Dry and reinstall spark plug.
Start engine with throttle
lever in FAST position.
Replace or repair faulty
components as necessary.
Correction
Clean or replace filter.
Drain fuel tank and
carburetor . Refuel with
fresh gasoline
Replace or repair faulty
components as necessary.