Engine Oil Change - TOOLWAY BOLTON PRO 192021 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Refuel in a well-ventilated area before starting the engine. If the engine has been
running, allow it to cool. Refuel carefully to avoid spilling fuel. Do not fill the fuel
tank above the fuel strainer shoulder. After refueling, tighten the fuel tank cap
securely.
Never refuel the engine inside a building where gasoline fumes may reach
flames or sparks. Keep gasoline away from appliance pilot lights, barbecues,
electric appliances, power tools, etc.
Spilled fuel is not only a fire hazard, it causes environmental damage. Wipe up
spills immediately.
Do not fill above the shoulder of the fuel strainer (maximum
fuel level).
Refuel in a well-ventilated area before starting the engine. If the engine has been
running, allow it to cool. Refuel carefully to avoid spilling fuel. Do not fill the fuel
tank above the fuel strainer shoulder. After refueling, tighten the fuel tank cap
securely.
Never refuel the engine inside a building where gasoline fumes may reach
flames or sparks. Keep gasoline away from appliance pilot lights, barbecues,
electric appliances, power tools, etc.
Spilled fuel is not only a fire hazard, it also causes environmental damage. Wipe
up spills immediately.
Fuel can damage paint and plastic. Be careful not to spill
fuel when filling your fuel tank. Damage caused by spilled
fuel is not covered under warranty.

ENGINE OIL CHANGE

Drain the used oil while the engine is warm. Warm oil drains quickly and
completely.
1. Place a suitable container below the engine to catch the used oil, and then
remove the oil filler cap/dipstick, drain plug and sealing washer.
2. Allow the used oil to drain completely, and then reinstall the drain plug, and
tighten it securely.
Please dispose of used motor oil in a manner that is compatible with the
environment. We suggest you take used oil in a sealed container to your local
recycling center or service station for reclamation. Do not throw it in the trash;
pour it on the ground, or down a drain.
3. With the engine in a level position, fill to the outer edge of the oil filler hole with
the recommended oil.
Engine oil capacities:
192091, 192092 = 0 .6 L;
Running the engine with a low oil level can cause engine
21

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Bolton pro 192022

Table des Matières