Maintenance; Troubleshooting - iComfort ic0906 Manuel De L'utilisateur

4. maintenance

• this product should only be maintained by icomfort certified technicians otherwise,
the warranty will be void.
• make sure the wall outlet is in good working order before use.
• if this massage unit will not be used for an extended period of time, store in a dry
and dustless environment.
• avoid product exposure to high temperatures and direct sunlight.
• clean this product with a dry cloth.
• do not use thinner, benzene or alcohol.
• We recommend to use the massager intermittently and not for long time periods.
• Wireless remote control Battery replacement
1. Battery compartment is at the back of the remote control.
2. press the small clip with your index finger while simultaneously using your
thumbnail to pullout the drawer battery compartment.
3. insert a new "litHium" battery type cr202s and then put the compartment
back in place.

5. trouBlesHooting

• it is normal for the motor to make noise while in use.
• if the foot massager doesn't work normally, please check that the plug and socket
are properly connected and the switch is turned on.
• When the programmed working time is over, the massager will power-off
automatically.
• after several use, the massager might power-off because of overheat. it can be used
again after half an hour of cooling time.
3