Assembly; Operation; Switching On/Off; Nozzle Usage - CARAMBA CP-WDE 2012 Inox Traduction De La Notice D'utilisation Originale

GB
cessories"). The use of parts
by other manufacturers imme-
diately renders the guarantee
void.
• Only have repairs carried out
at our authorised customer
service points.
• Observe the instructions for
cleaning and maintenance of
the machine.
• Store the appliance in a dry
place and out of reach of chil-
dren.

Assembly

Pull out the mains plug.
This will prevent danger of injury
from electric shock.
The appliance is supplied with the
textile filter bag (
1. Attach the carrying handle (2)
firmly using the cross-head
screws (2a) supplied.
2. Insert the filter:
- Foam filter for wet vacuum-
ing (
- Material filter (
vacuuming,
- Paper filter bag (
Never vacuum without a filter!
3. Place the motor housing (1) on
top of the dirt collector (8) and
close it
4. Connect the vacuum hose (13)
(bayonet fixing) and the acces-
sories.
20
16) fitted.
15),
16) for dry
17).
with the clips (6).

Operation

Fully unwind the suction hose
( 13) before commencing work.

Switching on/off

Connect the mains plug.
Switching on the vacuum:
On/off switch (
Switching off the vacuum:
On/off switch (

Nozzle usage

Floor nozzle (
ment ( 19):
for wet and dry vacuuming of smooth sur-
faces and fitted carpets.
Floor nozzle (
tachment ( 19):
for wet and dry vacuuming of fitted car-
pets and for removing persistent dirt.
• Press the clips on the right and left
side of the floor nozzle (
remove the insert attachment (
Mind that sensitive surfaces might
get scratched if the insert attach-
ment is not used.
Crevice nozzle (
for vacuuming gaps, corners and radiators.

Wet vacuuming

1. For wet vacuuming or to vacuum wa-
ter, fit the foam filter (15) to the filter
basket (21).
3) in position "I".
3) in position "O".
18) with insert attach-
18) without insert at-
18) and
20):
19).