Overview; Functional Description; Pictograms Regarding The Use Of Nozzles And Filters - CARAMBA CP-WDE 2012 Inox Traduction De La Notice D'utilisation Originale

1 Motor housing
2 Carrying handle
8 Waste container
9 4 feet with castors and acces-
sory fittings
12 3-part vacuum tube
13 Vacuum hose with handle
15 Foam filter
16 Material filter (already mounted)
17 Paper filter bag
18 Floor nozzle with
19 turnable insert attachment
with brush and rubber lip, for
vacuuming carpets and smooth
surfaces (already mounted)
20 Crevice nozzle
- 2 cross-head screws
- Instruction Manual

Overview

Housing
1 Motor housing
2 Carrying handle
3 On/off switch
4 4 attachment ports for accessories
5 Blower connection
6 2 locking clips
7 Suction connection (not visible)
8 Waste container
9 4 feet with castors
10 Mains cable
11 Power cable holder
Accessories
12 3-part vacuum tube
13 Vacuum hose with
14 Handle component
Filter
15 Foam filter for wet vacuuming
16 Material filter for dry vacuuming
(already mounted)
17 Paper filter bag to vacuum
coarse dirt
Nozzles
18 Floor nozzle with
19 turnable insert attachment
with brush and rubber lip, for
vacuuming carpets and smooth
surfaces (already mounted)
20 Crevice nozzle
27 Drainage outlet
21 Filter basket
22 Flaps on the paper filter bag
23 Intake connections
24 Sealing ring
25 Lip on the suction pipe
26 Power cable holder

Functional description

The wet and dry vacuum cleaner is
equipped with a robust plastic container
for waste collection. The castors make the
appliance very easy to manoeuvre. The
suction flow is switched off by a float dur-
ing wet vacuuming once the waste tank is
full. The appliance is also equipped with a
blower function.
The following describes the function of the
operating parts.
Pictograms regarding the use
of nozzles and filters
Nozzle to vacuum carpets.
Nozzle to vacuum smooth surfaces
and hard floor surfaces.
Nozzle to vacuum dust and dirt
from joints and cracks.
Specific nozzle to vacuum cush-
ions and mattresses.
GB
17