Setting The Air Volume / Massage Speed; Setting The Timer - sanowell ActiveSpa Mode D'emploi

We recommend installing your ActiveSpa bubble spa at the bathroom wall with the wall
mount. Please note the mounting instructions in this manual (section 9.1).
3.3. Switching on the bubble spa
Insert the plug of the device into a power outlet; make sure your hands are dry.
Switch on the blower at the green main switch on the side. Once the main switch is set
to "I", you will hear an acoustic signal. The green lamp at the "ON" button of the key pad
fl ashes. The Display shows the digits "00". The device is now ready for operation.
By pressing the "ON" button, you will activate the device with the default settings. The
display now shows massage speed 6. The timer is set to 15 minutes.
4. Changing settings at the blower unit

4.1. Setting the air volume / massage speed

You can adjust the massage speed using the buttons "Massage" and "+" or "-". To set the
massage speed, press the "Motor" button fi rst. The function is active when the green lamp
lights up. Now you can adjust the motor output in 12 steps using the "+" (stronger) and
"-" (weaker) buttons. Either keep the button pressed (the massage speed is increased or
decreased automatically) or press the button as often as required.

4.2. Setting the timer

With the buttons "Time" and "+" or "-" you can adjust the duration of your massage. Press
the "Time" button fi rst. The function is active when the green lamp lights up. Now you
can adjust the time with the "+" (longer) and "-" (shorter) buttons. Either keep the button
pressed (the time is increased or decreased automatically) or press the button as often as
required. When the set time has expired, the device is switched off automatically. You can
set a time between 1 and 60 minutes.
4.3. Setting the ozone function
Use the "Ozone" button to activate the ozone function of your bubble spa. The function
is active when the green lamp lights up. The "O " in the display fl ashes briefl y. For more
3
information on the ozone function, please see section 7 - "What is ozone?"
5. Selecting the massage programs
Select your desired massage program using the "Pro" button. Press the "Pro" button until
the desired program appears in the display. The program is active when the green lamp of
the "Pro" button is lit.