GB
•
Do not use the device for re-
moving weed or moss not grow-
ing on the ground, i.e. moss
growing on walls or rocks etc.
•
Always inspect the brush before
starting the device. Never use
damaged brushes. Replace any
damaged or worn brush.
•
The brush must not be mount-
ed on devices with an engine
speed exceeding the admissi-
ble maximum engine speed of
the brush.
•
Do not traverse gravel paths
while the equipment is operat-
ing. Gravel can be thrown up
and result in injury.
•
Do not operate the equipment
in the vicinity of inflammable
liquids or gases as this could
give rise to the danger of a fire
or explosion.
•
Store the equipment in a dry
place that is not accessible to
children.
CAUTION! The following
states how damage to the
equipment and possible injury
to people can be avoided:
Taking care of the equipment:
•
Ensure that the ventilation open-
ings are not clogged.
•
Only use spare parts and acces-
sories that have been supplied
or recommended by the manu-
facturer.
•
Never try to repair the equip-
ment yourself. All work that has
not been listed in these Instruc-
tions must only be carried out by
an authorised servicing agency.
24
•
Treat the equipment with the
greatest care. Always keep the
equipment clean for better and
safer work. Follow the mainte-
nance instructions.
•
Never overload the equipment.
Always work within the stated
capacity range. Do not use low-
power machines for heavy-duty
work. Do not operate the equip-
ment for purposes for which it is
not intended.
•
Always inspect the equipment
before it is to be used. Do not
operate the equipment if safety
devices, parts of the cutting de-
vice or bolts are missing, worn
out or damaged.
•
Brushes may not be attached to
machines whose speed is higher
than the maximum permissible
brush speed.
•
Damaged brushes must not be
used.
•
Rust discolouration or other
signs of chemical or mechanical
change on the equipment mate-
rial can cause premature failure
of the brush.
•
Brushes must be stored in
suitable racks, containers or
boxes so that they are protected
against the following influences:
- High levels of humidity, heat,
water or other liquids, which
could cause damage to the
brush
- Acids or vapours of acids that
could cause damage
- Temperatures that are so
low that they could lead to
condensation on the brushes
if they are stored in an area
with higher temperatures