Maf; Equalizer; Midi - Viscount YP200 Manuel Du Propriétaire

owner's manual

MAF

This function allows you to enable or disable the
MAF effect (Multiple Acoustic Feel) exclusively
present on the two piano presets.
Keep the MAF Function Key pressed (E7) and press
the DATA button on the panel.
The vocal guide will tell you the MAF status.
To change the MAF status, keep the MAF (E7)
function key and press the DATA button on the
panel. The vocal guide will tell you the status (MAF
ON or MAF OFF).
By default the function status is: MAF ON
To exit the MAF function you must release MAF
Function Key, last MAF status will be stored.

EQUALIZER

This function allows you to enable or disable the
internal equalizer.
To change the equalizer status, keep the
EQUALIZER Function Key (F7) pressed and press
the DATA button on the panel. The vocal guide
tells you the EQUALIZER status (EQUALIZER ON or
OFF).
Simultaneously pressing DATA UP and DATA DOWN
will be set to the default value: EQUALIZER ON.
To exit the EQUALIZER you must release the
Equalizer Function Key, last EQUALIZER status will
be stored.

MIDI

With this function you can set the transmit and
receive MIDI channel.
Hold down the function key MIDI (G7) and press
the DATA button. The vocal guide signals MIDI.
To change the channel number (valid for both
transmitting and receiving) press the first octave
of the keyboard referring to the numbers below
them. Numbers vary from 01 to 16.
For example, to set the channel 03, first press
the C2 (0), then the key C1 (3).
Unlike other functions, as soon as it recognizes a
valid channel number, YP200 automatically exits
the operation.
Simultaneously pressing DATA UP and DATA DOWN will be set to the
default value (MIDI In/Out Channel: 01)
touch tune temper. time s. effects
touch tune temper. time s. effects
touch tune temper. time s. effects
YP200
maf eq midi backup help standby
maf eq midi backup help standby
maf eq midi backup help standby
EN - 7