Temperaments; Time Signature; Effects - Viscount YP200 Manuel Du Propriétaire

owner's manual

TEMPERAMENTS

This function allows you to modify the current piano temperament (or tuning). The default
setting is EQUAL temperament, but other temperaments can easily be recalled.
Press the TEMPERAMENTS (B6) function key on
the piano keyboard and the DATA button on the
control panel. The vocal guide will tell you the
current temperament selection, Pressing the DATA
button again, it will be possible to recall the other
temperaments.

TIME SIGNATURE

This function allows you to modify the metronome
Time Signature. The default value is 4/4.
Press the Function Key C7 (Time Sign) and the
DATA button on the control panel.
The metronome will properly signal the current
time signature, and the metronome led will start
flashing.
Press the DATA UP/DOWN button to change the
time signature:
1/4 - 2/4 – 3/4 - 4/4 – 5/4 – 6/4 – 7/4 –
3/8 – 6/8 – 7/8 – 9/8 – 12/8 .
Simultaneously pressing DATA UP and DATA DOWN, the default time
signature (Equal) will be set.
To exit the TIME SIGNATURE, you must release the C7 key will be
stored as the last time signature.

EFFECTS

The sounds of YP200 are enriched by digital effects generated by the internal Sound Engine.
This menu allows you to disable or enable the Reverb effect. Press and hold the Function Key
D7, corresponding to the EFFECTS function and press DATA UP or DATA DOWN button. The
vocal guide tells you the active effect status.
To change the value, keep the Function Key
pressed then press the DATA button on the
panel. The vocal guide will tell you the status
(EFFECTS ON or EFFECTS OFF).
Simultaneously pressing DATA UP and DATA
DOWN will be set the default value: EFFECTS
ON.
1. Equal (default)
2. Meantone
3. Kirnberger
Simultaneously pressing DATA UP and
DATA DOWN,
temperament (Equal) will be set.
touch tune temper. time s. effects
the default
touch tune temper. time s. effects
touch tune temper. time s. effects
YP200
maf eq midi backup help standby
maf eq midi backup help standby
maf eq midi backup help standby
EN - 6