Motorola IHF1000 Instructions D'installation page 14

BTHandsfree_multi.book Page 12 Tuesday, July 12, 2005 8:46 AM
1 Connect the GREEN Ignition Sense wire to an
ignition-switched location on the fuse block. When the
ignition is off, the ignition sense line is low.
2 Connect the YELLOW Entertainment Mute Wire to the
vehicle's entertainment system.
Note: This feature is only operational if the vehicle's
radio supports this capability. Installation may require
an optional relay (not included). The mute line is an
active low signal.
3 Connect the RED positive battery lead to a point in the
vehicle's fuse box that is fused at 5 amp.
4 Connect the BLACK ground wire to the vehicle chassis.
5 Inspect all connections.
Note: The ORANGE and BLUE wires are not used.
(These wires are used to connect the line-level audio to
the vehicle radio, if the radio supports this feature.)
Note: The system's handsfree audio has been optimized
for the external speaker. Routing the audio output through
the vehicle's entertainment system may alter the
handsfree audio performance.
12