Guarantee & Service - Philips Satinelle HP6408 Mode D'emploi

EnglisH
10
Cleaning the epilating head
1 Switch the appliance off, remove the adapter from the wall socket
and pull the appliance plug out of the appliance (Fig. 1).
 Remove the epilating head (Fig. 1).
 Remove loose hairs with the brush supplied. (Fig. 14)
4 Rinse the epilating head under the tap for 5-10 seconds while
turning it. (Fig. 15)
5 Shake the epilating head firmly and dry it thoroughly with a tea
towel. The epilating head should be completely dry before you
place it back onto the appliance (Fig. 16).
Environment
Do not throw the appliance away with the normal household waste
,
at the end of its life, but hand it in at an official collection point for
recycling. By doing this you will help to preserve the
environment (Fig. 1).
guarantee & service
If you need information or if you have a problem, please visit the Philips
website at www.philips.com or contact the Philips Customer Care
Centre in your country (you will find its phone number in the worldwide
guarantee leaflet). If there is no Customer Care Centre in your country,
turn to your local Philips dealer or contact the Service Department of
Philips Domestic Appliances and Personal Care BV.
Troubleshooting
If the appliance does not work or does not work properly, first check the
list below. If the problem is not mentioned in this list, the appliance
probably has a defect. In that case we advise you to take the appliance to
your dealer or to an authorised Philips service centre.