Care And Use Instructions - Kichler 330162 Manuel D'instructions

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

CARE AND USE INSTRUCTIONS

1.
Read and understand these Care and Use Instructions
and all installation instructions provided with this
fixture, both front and back, before proceeding with
assembly, installation, care and use of this fixture.
2. If you have doubts about how to install a lighting
fixture or if the fixture fails to operate correctly, please
contact a local qualified licensed electrical contractor.
3. All parts must be used as indicated in the assembly/
installation instructions. Do not substitute the
parts provided with any other parts (use authorized
replacement parts only) or use any parts which are
worn out or broken. If replacement parts are needed,
write to
Authorized Replacement Parts Distribution Department,
P.O. Box 318010, Cleveland, Ohio 44131-8010.
Failure to obey this instruction could invalidate the ETL/
UL or CSA certification for this fixture.
4. Be sure to use light bulbs with wattage no greater than
specified on this fixture. Be certain the electric current
is turned off before changing light bulbs.
5. If a green insulated wire or bare copper or silver wire is
included with this fixture be certain never to attach this
wire to the "hot" current carrying supply wire.
6. Be sure the fixture is supported by a chain only (if
fixture hangs by chain) and not by wire.
7.
The hand-crafted beauty of this fixture is the
result of tasteful design, experienced engineering,
careful craftsmanship and a dedication to customer
satisfaction. You will be assured years of service and
enjoyment if you read and observe the following list of
product care suggestions:
• Be certain electric current is turned off before
cleaning.
• Clean metal components with a soft cloth,
moistened with a mild liquid soap solution. Wipe
clean and buff with a soft dry cloth. Under no
circumstances should any metal polish be used,
as its abrasive nature could damage the protective
finish placed on the metal parts.
• Wood components may be polished with a fine
furniture polish, taking care to avoid getting the
polish on the metal surfaces.
• Never wash glass shades in an automatic
dishwasher. To wash glass shades, line a sink with a
towel and fill with warm water and a mild liquid soap.
Wash glass with a soft cloth, rinse and wipe dry.
5
52" Renew Premier |

Publicité

Table des Matières
loading

Table des Matières