Unpacking; Assembling - Optika Italy TB-3W Manuel D'instructions

6.

Unpacking

The device is housed in a moulded Styrofoam container. Remove the tape from the edge of the container and
lift the top half of the container. Take some care to avoid that the optical items (camera and projection lens) fall
out and get damaged.
Do not touch with bare hands optical surfaces such as lenses, filters or glasses. Traces of grease or
other residuals may deteriorate the final image quality and corrode the optics surface in a short time.
7.

Assembling

7.1 TB-3W / TB-5W
Once opened the TB-3W / TB-5W box, the system parts are the following:
③
① Camera
TB-3W: 3MP
TB-5W: 5MP
② Projection lens
③ Tablet + keyboard
①
⑦
⑥
④ Tablet power supply
⑤ OTG cable
⑥ USB cable
⑦ Touch pen
Page 5
②
④
⑤