Assembly; Fitting A Wall Bracket - Weinmann ULM CASE Mode D'emploi

4

Assembly

4.1 Fitting a wall bracket

If you want to fit the case to a vehicle panel, only use wall bracket
WM 15370 (see "8 Product and Spare Parts", page 10).
If you want to fit the case to the wall of a building, you may use
the appropriate wall bracket WM 15731 (see "8 Product and Spare
Parts", page 10).
1. Mark the position of the drill holes.
You can use the wall bracket as a template.
Univ. wall bracket WM 15370
2. Drill the fixing holes:
• In vehicles: with a 3 mm drill.
• In buildings: with a suitable drill for the wall plugs used.
3. Attach the wall bracket firmly.
Wall bracket WM 15371
ULM CASE
Assembly
EN 7