Telestar DIRA M 14i Manuel D'utilisation page 123

7. SETTINGS
Activate the alarm clock via the Status line.
In the next line, set the time at which the alarm clock should be
activated. Use the numeric keypad on the remote control or the
control dial on the device for this.
To confirm the individual entries, they must be saved with the
ENTER button.
Set the repetition intervals in the Date line.
You can decide whether the alarm clock should be activated
once, daily, on weekdays or only on weekends at the
set time.
Set the volume in the next line,
with which the alarm clock should be activated.
In the Beep line you can decide whether the
alarm clock should sound with a signal tone, or whether the alarm
should sound with an Internet radio station, DAB radio station
or FM station.
Please note that when selecting FM, DAB/DAB +
or Internet radio station at least one favourite station
must be saved for the respective type.
To stop an alarm, press the STANDBY button
123
EN