Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Page 8
ENGLISH
Section 2. General Description
TO JANDY AUTOMATION
RS485
HEATER
CELL
The cell must be installed
as the last piece of equipment in
the circulation plumbing system
just before the pool.
Figure 1.
Example of Installation
2.1
Product Specifi cations
Maximum Operating Pressure: 50 psi
Minimum Flow Rate: 76 lpm (20 gpm)
Required Salt Level: 3.0 gpl (3,000 ppm)
Maximum water volume treated:
132,000 L (35,000 gal.)
Chlorine Output:
0.42 kg (0.93 lbs) per day
Input Voltages: 120/240 VAC
Input Current @ 240 VAC: ~2 A
Input Current @ 120 VAC: ~4 A
Jandy
Pro Series TruClear
®
™
POWER PACK
CHECK VALVE
RETURN
WATER FEATURE /
IN FLOOR CLEANER
Input Freq: 50/60 Hz
Output Voltage: 25V DC (max)
Dimensions:
Power Pack (L x W x H):
25.4 cm x 11.4 cm x 33 cm (10 in. x 4.5 in. x 13 in.)
Electrolytic Cell (L x W x H):
16.5 cm x 14 cm x 30.5 cm (6.5 in. x 5.5 in. x 12 in.)
Weight:
Power Pack: 3.2 kg. (7 lbs)
Electrolytic Cell: 0.9 kg (2 lbs)
|
Chlorine Generating System
Installation & Operation Manual
FILTER
INTAKE
TO COMMON
POWER SOURCE
PUMP
Publicité
Chapitres
Table des Matières
Dépannage
