Filtration Process; Important - Certikin Florida Manuel D'installation Et D'entretien

ENGLISH
Assembly of the manometer (with lateral valve)
Assembly of the manometer (with top valve)
SAND LOAD
In order to obtain maximum efficiency from your filter, it should be filled with silica sand with a grain size
classification of 16 / 32 inches. With the quantity indicated on the plate specifying the characteristics;
proceed as follows:
1.- Load up when the filter is installed in position and the connection pipes have been joined.
2.- Take off the lid and joint.
3.- Fill the filter with water to half capacity.
4.- Pour the required quantity of sand inside the filter.
5.- Clean the seating of the lid joint.
6.- Fix the filter lid in place.

FILTRATION PROCESS

The selector valve has a handle of 6 positions that selects any of the necessary operations to obtain
the maximum efficiency from the filter.
IMPORTANT: Always switch off the pump, when changing the position of the selector valve.
-06-