Control Panel; Charging - IWatMotion iWatRoad R9 eXtreme Manuel D'instructions

2

CONTROL PANEL

Power button
To turn the scooter on press the power button, to turn it off, press and hold for five seconds. When the scooter
is on, press the button once to turn the front light, to turn both the front light and the LED strip on/off, press
the button twice.
Battery indicator
There is a speedometer and a battery indicator on the screen. When the battery is completely charged, there
will be five bars. These will disappear as the battery runs out. One bar left means the battery is running low;
please charge it before the next use.
3

CHARGING

1.
Open the charging port
cover.
17
2.
Insert the charger.
WARNING
Do not connect the charger if the
charging port or the cable are wet.
Your scooter will be fully charge when
the LED on the charger changes from red
(charging) to green (fully charged).
Cover the charging port when not in
use.
electric
SCOOTER
3.
Once you have charged
the scooter close the
charging port.