Télécharger Imprimer la page

SOUNDMASTER IR3500 Mode D'emploi page 30

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 36
FM radio mode receives analogue radio from the FM band and
displays RDS (Radio Data System) information about the station
and where broadcast.
To full scan, press "INTRO" remote key. The frequency display starts to run and scans the FM
full band.
To fine tune press the "
Preset
To store an Internet radio preset, press and hold the "PROGRAM" button on Remote
Control until the display shows the "Save preset" screen. Select one of the 40 presets to
save the current station and press "OK" to confirm. Or press 0 to 9 on the Remote Control
to store the current playing station into the preset directly.
To select a preset, press briefly the "PRESET" button or "PROGRAM" button on Remote,
then select one of the listed preset stations and press "OK" to confirm. Or press 0 to 9 on
the Remote Control to directly recall the presets.
Now playing information
While the stream is playing, the screen shows its frequency, or if RDS signal is available,
station name and any further RDS information such as program name, title and other
details. Stereo broadcasts are indicated with an icon at the bottom of the screen. To view
further information, press Info button on the radio.
Each time you press "INFO" button on the radio, another set of information is displayed,
cycling through Radio text, program type, frequency and today's date
Settings
Scan settings
Choose FM at first, it will go to a specific station playing. Then press "MENU" on the radio to
get above table.
By default, FM scans stop at any available station. This may result in a poor signal-to-noise
ratio (hiss) from weak stations. To change the scan settings to stop only at stations with
good signal strength, select "Yes" after choosing Strong station only.
Audio settings
All stereo stations are reproduced in stereo. For weak stations, this may result in a poor
signal-to-noise ratio (hiss). To play weak stations in mono, select FM weak reception: Listen
in mono only and then YES.
" or "
" remote key. The unit search in 0.05 MHz steps.
FM
11
IR3500 / English Instruction Manual
.

Publicité

Dépannage

loading