Télécharger Imprimer la page

Time/Date; Backlight; Language; Software Update - SOUNDMASTER IR3500 Mode D'emploi

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 36
Push Button Configuration, it is to connect the AP that supports WPS (Wi-Fi Protected
Setup).
View settings
View the information of current connected network: Active connection, MAC address, WLAN
region, DHCP, SSID, IP address, Subnet mask, Gateway address, Primary DNS and
Secondary DNS.
Manual settings
Choose wireless network connection and enable or disable DHCP (Dynamic Host
Configuration Protocol).
Network profile
IR3500 remembers the last four wireless networks it has connected to, and automatically
tries to connect to whichever one of them it can find. From here you can see the list of
registered networks. You can delete unwanted networks by turning and pressing then
choosing YES to confirm delete.
Keep network connected
If you choose to keep network connected, the WiFi will not
disconnect even you are in standby mode. Otherwise, the
connection will only available in internet radio and music player
modes. This option allows IR3500 to be ready for DLNA
streaming in any operating modes.
When Keep network connected is selected the standby power
consumption is raised.
Set the time manually or automatically update, time format, time zone and daylight.
You may change the backlight of each environment (Normal or DIM) to High, Medium High,
Medium, Medium Low, Low or Off
Change it as your preference.
From time to time, software upgrades may be created with bug fixes and/or additional features.
You can either check manually or set IR3500 to check periodically automatically (this is the
default). If newer available software is detected, you will be asked if you want to go ahead with
an update. If you agree, the new software is then downloaded and installed. After a software
upgrade, all user settings are maintained.
NOTE: Before starting a software upgrade, ensure that IR3500 is plugged into a stable main
power connection. Disconnecting power during an upgrade may permanently damage the unit.
View the firmware version and the radio ID.

TIME/DATE

BACKLIGHT

LANGUAGE

SOFTWARE UPDATE

INFO

7
IR3500 / English Instruction Manual

Publicité

Dépannage

loading