SOUNDMASTER IR3500 Mode D'emploi page 29

To start a scan manually, choose Full scan. To scan only stations with good signal strength,
select Local scan.
Once the scan is complete, the radio shows a list of available stations.
To remove stations that are listed but not unavailable, choose Prune invalid.
•
Presets
To store an Internet radio preset, press and hold the "PROGRAM" on Remote Control until
the display shows the "Save preset" screen. Select one of the 40 presets to save the current
station and press "OK" to confirm. Or press 0 to 9 on the Remote Control to store the
current playing station into the preset directly.
To select a preset, press briefly the "PRESET" button on the unit or "PROGRAM" on
Remote Control , then select one of the listed preset stations and press "OK" to confirm. Or
press 0 to 9 on the Remote Control to directly recall the presets.
Now playing information
While the stream is playing, the screen shows its name and DLS (Dynamic Label Segment)
information broadcast by the station giving real-time information such as program name,
track title and contact details. Stereo broadcasts are indicated with an icon at the bottom of
the screen. To view further information, press "INFO" button on the radio.
Each time you press "INFO" button on the radio, another set of information is displayed,
cycling through DLS text, program type, ensemble name/frequency, signal strength/error
rate, bite rate/codec/channels and today's date.
•
Settings
Dynamic range compression (DRC)
If you are listening to music with a high dynamic range in a noisy environment, you may
wish to compress the audio dynamic range. This makes quiet sounds louder, and loud
sounds quieter. You can change DRC as off, low or high.
Station order
You can choose the order of the DAB station list to be either Alphanumeric, Ensemble or
Valid.
Ensemble lists groups of stations that are broadcast together on the same ensemble. Valid
lists valid stations first, alphanumerically, then off-air stations.
10
IR3500 / English Instruction Manual