Glide'n'serve; Detaching/Assembling The Storage Bins - LG LFCC22426 Serie Manuel Du Propriétaire

Glide'N'Serve

The Glide'N'Serve provides storage space with
a variable temperature control that can keep the
compartment at a slightly different temperature than
the refrigerator section. This drawer can be used for
large party trays, deli items and beverages. (This
drawer should not be used to store vegetables that
require high humidity.)
Press the Select button to choose between Produce
(Cold), Deli (Colder) and Meat (Coldest).
NOTE
• This feature is only available on some models.
Detaching/Assembling the
Storage Bins
Some bins may vary in appearance and will only fit in
one location.
Glide'N'Serve and Crispers
1
To remove the humidity controlled crispers and
the Glide'N'Serve, pull out the crisper (1) or
Glide'N'Serve (2) to full extension, lift the front up,
and pull straight out.
2
To install, slightly tilt up the front, insert the crisper
or drawer into the frame and push it back into
place.
Crisper Cover
To remove, lift the front of the cover up until it
detaches from the back wall of the cabinet, then pull
it out.
Door Bins
The door bins are removable for easy cleaning and
adjustment.
1
To remove the bin, simply lift the bin up and pull
straight out.
2
To replace the bin, slide it in above the desired
support and push down until it snaps into place.
CAUTION
• Regularly detach and wash the storage bins and
shelves; they can become easily contaminated
by food.
• Do not apply excessive force while detaching or
assembling the storage bins.
• Do not use the dishwasher to clean the storage
bins and shelves.
OPERATION 33