Console Instructions - DESKFIT DFX100 Mode D'emploi

A. LCD full display
B. Function List
Function Display
Switch Display every
1 SCAN
6 seconds
0:00~99:00 (mi-
2 TIME
nute: second)
3 COUNT 0~9999 HITS
4 T.COUNT 0~9999
5 CAL 0~9999 Calories
6 RPM 0~9999
C. Power On/Off:
Power ON
1. Power on and LCD full display for 1 second, enter then SCAN mode
2. Without signal input within 4 seconds, time pauses and will then switch to STAND BY mode
Power OFF
1. Without signal input within 4 minutes, IC enters SLEEP mode
2. The console WAKES UP when there is an input signal or when button is pressed.

CONSOLE INSTRUCTIONS

Brief Description
Displays order TIME> COUNT> T.COUNT> CAL> RPM
Under SCAN mode, press MODE key for further options.
Counts up till 99:59 then returns to 0:00.
Counts up till 9999 then returns to 0.
Shows the total count of the console in constant use. The number
returns to 0 when the console is power off.
Count up till reach 9999 then returns to 0.
Displays the value when there is a signal input.
Returns to 0 within 4 seconds when there is no sensor input
29