Ferm PRM1015 Traduction De La Notice Originale page 8

Cleaning
Regularly clean the machine housing with a soft
cloth, preferably after each use. Keep the
does not come off use a soft cloth moistened with
soapy water. Never use solvents such as petrol,
alcohol, ammonia water, etc. These solvents may
damage the plastic parts.
Troubleshooting
to possible failure.
1 The operating switch is switched on, but
the motor is not working
loose
3 Excessive vibration
4 Sparks inside the housing
Faults
Should a fault occur, e.g. after wear of a part,
please contact the adress on the warranty card.
parts that can be ordered.
Environment
during transport, it is delivered in a sturdy
packaging. Most of the packaging materials can
be recycled. Take these materials to the
appropriate recycling locations.
8
Faulty and/or discarded electrical or
electronic apparatus have to be
collected at the appropriate recycling
locations.
The guarantee conditions can be found on the
separately enclosed guarantee card.
The product and the user manual are subject to
further notice.