ring RPPL200 Mode D'emploi page 2

GB
1. Safety
Please read the instructions before using the jump starter and retain for future use. Misuse of the jump
starter may result in danger to the end user.
This product contains a Lithium Cobalt (LiCoO2) battery and must be charged: BEFORE USE – AFTER
USE – EVERY 6 MONTHS.
Only use the USB charging cable provided to recharge the jump starter.
This jump starter contains a lithium battery. Keep away from direct sunlight and any heat source. Do not
pierce the casing. Do not use of the casing is damaged
Explosive gasses may escape from the battery during the charging process. Prevent flames and sparks
and provide adequate ventilation when connecting or disconnecting from the battery
RPPL200
Micro USB socket input
RPPL300
Micro USB socket input
USB output socket
Safe Connect Clamps
Reverse polarity
LED (red)
Correct connection
4
LED (green)
Low battery power
<5V
LED (green flashing)
Jump start cable port
charging point
LED light
Jump start cable port
LED light
charging point
Power button
USB output socket
Power button