Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Most components can be checked by removing the cover. For head inspection, the component plate must be
dismounted which can be hung on the burner body in 2 positions to allow intervention in the most rationable
way. The motor, transformer and electromagnetic valve are electronically connected to plug/socket, the
photoresistance is inserted under pressure.
ATTENTION:
ensure unit is unplugged before removing cover.
FIG. A
By removing the cover, access is gained to:
condensor-motor, control box, transformer
photoresistance, pump, electromagnetic valve.
IMPORTANT:
x the de ector/electrodes set on the
nozzle holder tube in position as per
g. D.
MAINTENANCE
Fig. B
By unscrewing the plate xing pin the burner can be
opened allowing access to the fan, nozz le, electrodes
and preheater.
Fig. C - C1
To dismount the nozzle:
a) Loosen screw 1 and extract de ector/electrode set.
b) Unscrew the nozzle with spanner/counter-spanner .
Centering tongue for vertical
position or lightly to the right
position (max 10°)
21
1
max 10 °
Publicité
Table des Matières
