Switching Between Operating Modes - Atlantis NetFly AP4 WN+ Guide D'installation Rapide

2.2 Switching between Operating Modes

Click on the System link on the navigation drop-down menu. You will then see five
options: Operation Mode, Status, Schedule, Event Log, and Monitor. Click on
Operation Mode.
restart in order for the change to take effect. Click on the OK button to continue.
Router Mode (Operation Mode=Gateway): In order to configure NetFly as a

Router, select Access Point with Gateway function from the Operating Mode
drop-down list. IP is 192.168.1.252 ( 4 F/E LAN ports/WLAN). DHCP
Server enable.
Access Point Mode (Operation Mode=Bridge): In order to configure NetFly

as an Access Point, select Bridge from the Operating Mode drop-down list. IP
is 192.168.1.252 (5 F/E LAN ports, WLAN). DHCP Server enable.
Router Mode (Operation Mode=Wireless ISP): In order to configure NetFly

as a Router, select Access Point with Wireles ISP function from the
Operating Mode drop-down list. IP is 192.168.1.252 (5 F/E LAN ports).
DHCP Server enable.
A dialog box will appear to notify you that the system will restart in order for the
change to take effect. Click on the Apply button to continue
For more detailed instructions on configuring and using the NetFly, please refer to
the online manual into CD.
A dialog box will appear to notify you that the system will
33