Unable to fill LP tank Some dealers have older
One burner does
not light from other
burner(s)
If your problem is not resolved from the information above, please Contact your local gas
dealer.
a)
Turn the burner on for 15 to 20 minutes. Ensure appliance is cold before continuing.
b)
Grids should be cleaned periodically by soaking and washing in soapy water.
c)
The interior surfaces of the grill housing cover should also be washed with hot, soapy
water. Use a wire brush, steel wool or a scouring pad to remove stubborn spots.
d)
Periodically check the burner to see that it is free from insects and spiders which may
clog the gas system, deflecting gas flow. Ensure to clean venturi pipes on burner very
carefully, make sure that there are no obstructions. We recommend that you use a
pipe cleaner to clean the venturi pipe area.
e)
Any modifications of this appliance may be dangerous and are not permitted.
GAS GRILL SAFETY HINTS
Stand your gas grill on a safe level surface, away from inflammable items such as wooden
fences or overhanging tree branches.
Never use your gas grill indoors!
Once lit do not move your gas grill or leave it unattended.
Keep children and pets at a safe distance from the gas grill.
Keep a fire extinguisher handy.
The gas grill will become hot when in use, so handle lids etc. with the help of gloves.
Ensure that the appliance has completely cooled down before storing.
PROTECTION OF THE ENVIRONMENT – DIRECTIVE 2012/19/EU
In order to preserve our environment and protect human health, the waste electrical and
electronic equipment should be disposed of in accordance with specific rules with the
implication of both suppliers and users. For this reason, as indicated by the symbol
rating label or on the packaging, your appliance should not be disposed of as unsorted
municipal waste. The user has the right to bring it to a municipal collection point performing
waste recovery by means of reuse, recycling or use for other applications in accordance with
the directive.
The user manual is by simple request also available in electronic format from the after-sales
service (see warranty card).
fill nozzles with worn
threads.
Grease buildup or food
particles in end of
carryover tube
Turn worn nozzles don't have enough "bite" to
engage the valve. Try a second LP dealer.
Clean carry-over tube with wire brush
19
on the
GBBQ 1004
- 190108