Operating Elements And Displays; Signal Tones; Safety Equipment; Warning Notices On Device - CASO DESIGN MG20CERAMIC menu Mode D'emploi Original

14.2 Operating elements and displays

14.3 Signal tones

The device transmits the following signal sounds as an acoustic feedback signal:
 One signal tone: The device has accepted the entry.
 Two signal tones: The device has not accepted the entry. Check the entry and try again.
 Three signal tones: The cooking time has ended.

14.4 Safety equipment

14.4.1 Warning notices on device

ATTENTION
Danger due to hot surface!
There is a warning notice referring to dangers due to hot surfaces located on the back upper
side of the housing. The surfaces of the device can become extremely hot.
► Do not touch the hot surfaces of the device. Danger of burns!
► Do not set or lay any items on the device.
caso MG20CERAMIC menu
Display panel: Cooking time, output, function
display and actual time are displayed.
Power/sound: Press to set the power level of the
microwave or to switch on/off the sound
Time/Weight: Press to set the clock or the weight of
the food.
Grill: Press to set a grill cooking programme.
Microwave/Grill: Press to select a combination
cooking programm (microwave and grill).
Stop: Press to stop the cooking program (1x) and to
delete all previous settings prior to starting the
cooking procedure (2x).
Start/Quickstart: Press to start the cooking
programme or to set the Quick Start cooking
programme.
Time/Menu (control dial): Turn to set the cooking
time or to choose the automatic menu.
47