Quick Network Setup - Eneo PXB-1080Z03 D Guide D'installation Rapide

Select the „Editing the camera IP address" option to open a window for setting the cam-
eras IP properties. When you are done click the „Activate" button to update the camera
settings.
For further information, please refer to the eneo Scan Device Tool Quick Start Guide.

Quick Network Setup

The network camera's default IP address is: 192.168.1.10.
Therefore, to access the camera for the first time, set the PC's address as 192.168.1.XX; for
example:
IP Address: 192.168.1.20
Subnet Mask: 255.255.255.0
• Enter the camera's IP address in the URL bar of the Web browser window and hit
"Enter. "
• Enter the default user name (root) and password (root) in the prompt request
dialogue. It is also possible to reset IP parameters to the original factory default
settings by pressing the IP reset.
EN
9