Remington NE3850 Mode D'emploi page 5

ENGLISH
, TO REMOVE HAIR FROM EYEBROWS
• Attach the vertical linear trimmer.
• For trimming, attach one of the attachment combs onto the vertical linear
trimmer.
• Gently guide the cutting unit to stray, unwanted hairs along the eyebrow
line or protruding from the eyebrow itself.
• To remove the hairs completely, remove the attachment comb and lower
the trimmer onto the skin and move over the desired area.
• Use slow and well-controlled movements.
, TO REMOVE HAIR FROM EAR
• The vertical trimmer or rotary trimmer (NE3850) can be used for trimming
ear hair.
• Insert the cutting unit gently into the outer ear canal opening.
• Gently rotate the trimmer in a circular motion.
• Avoid inserting the cutting unit more than 6mm into your ear canal.
, Note: Do not apply excessive pressure as this damages the trimmer head
and may cause skin injury.
, TO SHAPE SIDEBURNS AND BEARD LINES (NE3870)
• Hold trimmer with detail trimmer blade (NE3870) facing you.
• Start with edge of beard/moustache line and gently lower the trimmer
blade onto your skin. Use motions towards edge of beard/moustache line to
trim to desired locations in facial area and away from beard in neck area.
, TO TRIM SIDEBURNS AND OTHER FACIAL HAIR AREAS (NE3870)
• The detail trimmer (NE3870) comes with an adjustable comb to trim
sideburns and other facial hair areas to any length between 1 and 5mm.
• To attach the comb onto the detail trimmer (NE3870), ensure the trimmer
blade is facing away from you and then slide the guide comb over the back
of the trimmer blade until fitted securely.
• Hold the trimmer with cutting blade facing you.
• Use a small comb to lift the hairs. Hold the comb at the desired beard or
moustache length.
• Move the trimmer along the comb to cut the hairs. Use light pressure and
well-controlled movements to trim hair.
5