Machine In Use; Machine Usage Advice; Breakaway Floor-Tool Feature - Numatic Nacecare TTB 3226 Mode D'emploi

Fig.27
Fig.28
The floor-tool design incorporates a breakaway feature allowing it to safely
disengage from its mounting should it become caught on an obstruction.
(See Fig.29)
Fig.29
To attach the blade to its holder, first loosen the retaining knobs on the floor-tool body and
slide onto the holding bracket.
Tighten retaining knobs to finger tight.
(See Fig.30)
Fig.30
To operate, select forward or reverse, press the accelerator
pedal. Vacuum pick-up and water-flow will turn on if selected and
the brush and floor tool are in the lowered position, the machine
will move forward.
The clean water is dispersed evenly via 'THRU- FEED'
scrubbing brushes.
The waste water is then retrieved by the suction floor-tool
(see Fig.27). Overlap each scrubbing path by 10cm to ensure
an even clean.
Do not operate the machine on inclines that exceed 11%.
NOTE: Care must be taken to reduce speed when
cornering or when manoeuvring around obstacles..
If streaking occurs wipe floor-tool blades clean (see Fig.28).
On heavily soiled floors use a 'double scrub' technique.
First pre-scrub the floor with the floor-tool in the raised position,
allow the chemicals time to work then scrub the area
a second time with the floor-tool lowered.
15

Machine in use

Breakaway floor-tool