Need Help - Philips Power2Charge SCM7880/05 Mode D'emploi

SCM7880_05_Meertalig
7 Troubleshooting
Problem
– Possible cause
• Solution
USB charger does not charge connected device
– Voltage of device does not correspond with that of USB
charger.
• Refer to the user manual that came with the device.
– Improper connection between device and USB charger.
• Make sure that the USB cable is properly inserted into
the device and the USB charger.
– Damaged USB cable or connector tip.
• Replace USB cable and/or connector tip.
– Wrong connector tip used.
• Check connector tip and replace if necessary.
– Battery power of USB charger too low.
• Charge USB charger.
– Non supplied USB cable / connector tip used.
• Replace with supplied USB cable/connector tip.
– Problems with electrical circuit of USB charger.
• Take the USB charger to your local distributor.
USB charger power runs out quickly
– USB charger not fully charged before using.
• Fully charge USB charger before using.
USB charger cannot be charged
– Improper connection between USB charger and wall outlet.
• Check that power plug is properly inserted into the wall
outlet.
– Problems with the electrical circuit of the USB charger.
• Take USB charger to your local distributor.
Note:
If you are unable to solve a problem by following the
above hints, try resetting the USB charger by pressing
RESET.The RESET button is recessed to prevent
accidental reset of the USB charger. Use a paperclip to
gently press the RESET button.
6
06-03-2008 10:17 Pagina 6
8 Maintenance
• Recharge the USB charger every three months when it
is not being used for a long period of time.
• Use a soft, lint-free cloth to clean the USB charger
exterior. Do not use harsh chemicals, cleaning solvents
or strong detergents.
• When any problems occur with the USB charger or the
accessories, take the charger and accessories to your
local distributor.
9

Need help?

Online help: www.philips.com/welcome
For interactive help and frequently asked questions.