Fagor FQ7925XUS Guide D'installation Et D'utilisation page 14

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Removing Refrigerator Door
Unscrew top hinge cover with a screwdriver.
1
Insert a thin screwdriver into the
side groove of the cover to remove.
2
Turn top hinge fastener counterclockwise 3~4 times.
Disconnect harness wires.(model dependent)
3
Lift the door straight up to remove
Replacing Freezer Door
1
Insert the water tube into the hole of the
bottom hinge pin first (Dispenser Models Only).
2
Let the top of door close to the cabinet and insert the
top hinge pin to the top hole of freezer door.
(Insert the back of hinge to the groove of protrusion
first, then front to the top hole of door.)
12
3
Turn the hinge fastener tightly to the end.
Connect harness wirings and screw down the ground wire.
Fasten the Bending Tube Guide and Insert the water
4
tube far into the coupling.(Dispenser Models Only)
Replacing Refrigerator Door
Insert the bottom hole of refrigerator
1
door straight into the bottom hinge pin
Let the top of door close to the cabinet and insert the
2
top hinge pin to the top hole of refrigerator door.
(Insert the back of hinge to the groove of protrusion
first, then front to the top hole of door.)
3
Turn the hinge fastener tightly to the end.
Connect harness wirings (model dependent) and screw
down the ground wire. Click and screw the top hinge
cover.

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Fq9925xus

Table des Matières