Samsung NY63875S Série Mode D'emploi page 48

Maintenance
Brass burner head
CAUTION
• The starter electrodes are not removable. Do not attempt to remove them by
force.
• To avoid chipping, do not bang grates and caps against each other or against
hard surfaces, such as cast iron cookware.
• The burner spreader can be blocked by food or dust. Clean the spreader if it
appears blocked. If you clean the spreader with water, assemble it only after it is
completely dry. If the spreader is wet, it might prevent the burners from igniting.
• To avoid falling down the grates, make sure to remove both sides grates first.
48 English
NY63T8751SS_AA_DG68-01218A-00_EN+MES+CFR.indb 48
NOTE
• The brass parts of your burner will change
color with use. However, this will not
affect performance and you can clean the
brass parts with a brass cleaner.
• After cleaning, confirm that the burner
port openings aren't plugged.
• Do not wash any burner components in a
dish washer.
Burner reinstall guide
Dual burner head
1. Orient the burner head so that the
2. Install the burner head so that the
Round burner head
1. Orient the burner head so that the
2. Install the burner head so that the
opening for the electrode lines up with
the electrode.
electrode passes through the opening for
the electrode. Make sure the burner head
lies flat on the stove top.
opening for the electrode lines up with
the electrode.
electrode passes through the opening for
the electrode. Make sure the burner head
lies flat on the stove top.
2020-03-23 6:46:16