Technical Data; Safety Instructions - oneConcept 10029330 Mode D'emploi

Dear Customer,
Congratulations on purchasing this equipment. Please read this manual carefully and take
care of the following hints to avoid damages. Any failure caused by ignoring the mentioned
items and cautions mentioned in the instruction manual are not covered by our warranty
and any liability.

Technical Data 8

Safety Instructions 8

Product Description 9
Use and Operation 10
Cleaning and Care 12
Troubleshooting 12
Hints on Disposal 13
Declaration of Conformity 13
Item number
Power supply
Power consumtion Wash
Power consumtion Spin
Wash capacity
Spin capacity
Weight
• Read all the safety and operating instructions carefully and retain them for future reference.
• Please insert the Power Plug into the 220-240 V socket with single-phase and three pole.
The grounding cord of the socket must be connected with ground safely. If possible using
the creepage protector would be better.
• When the machine is prepared for working, the socket for the power plug should be near
around so that the plug can be inserted or pulled off by your hand conveniently . Please
make sure to pull off the power plug and turn off the faucet .when power cutting moving
or cleaning the machine, and also when if is not be used. Do not insert or pull off the plug
with wet hand.
• Please do not bend. extend, wring or bundle the power cord extremely, also please do not
make the cord be pressed under the heavy stuff.
• Keep the Power Plug clean, if there are some dust on if , use the dry cloth to clean it up.
8
Contents
Technical Data
10029330
220 V ~ 50 Hz
400 W
150 W
6.8 kg
5.2 kg
18 kg
Safety Instructions