Grounding Instructions - Waring Commercial WPG250TSWE Mode D'emploi

SAVE THESE INSTRUCTIONS
APPROVED FOR
COMMERCIAL USE

GROUNDING INSTRUCTIONS

This appliance must be grounded while in use to protect the
operator from electrical shock. The appliance is equipped with a
3-conductor cord and 3-prong grounding-type plug to fit the proper
grounding-type receptacle. The appliance has a plug that looks like
the plug in drawing (1). An adapter, as in drawing (2), should be used
for connecting the appliance plug to two-prong receptacles. The
grounding tab that extends from the adapter must be connected to a
permanent ground such as a properly grounded outlet box as shown
in drawing (3) using a metal screw.
CAUTION: Before using an adapter, it must be determined that the
outlet cover plate screw is properly grounded. If in doubt, consult a
licensed electrician. Never use an adapter unless you are sure it is
properly grounded.
NOTE: Use of an adapter is not permitted in Canada and Europe.
3