Wall Mount Installation - AVer CAM520 Pro Mode D'emploi

4.
Connect RJ45 cable for IP streaming and
remote camera control or Power over
Ethernet.
[Note]
 Only advanced model supports PoE+ function.
 To ensure stability of IP video streaming, please
use CAT 5e FTP cable.
 For PoE switch hub, suggest using Gigabit PoE
switch to ensure stable power supply.

Wall Mount Installation

1. Use the drilling paper included in the package to drill the holes in the wall where the user wants
to mount the camera.
2. Use the screw to secure the
3. Then, assemble the
4. After assembling the L-mount bracket, secure the lower part of L-mount bracket on the wall.
5. Pass the cables through the hole on the L-mount bracket and connect the cables to
corresponding connection ports.
6. Use the remaining screws (included in package) to secure the cameras on the L-mount bracket.
A L-mount bracket on the wall.
+ B L-mount bracket with screws (included in package).
A
1
46.00[1.81]
Ø5.50[Ø0.22]
51.00[2.01]
P/N: 303AU340-AGR
4
6
2 3
A
5
English-4
Switch / PoE+ Switch
Ethernet cable
(Not included)
A
B