Philips 1000 Série Mode D'emploi page 6

ENGLISH
6
3 Put the battery in the battery compartment.
Make sure the + and - poles of the battery point in the right direction.
Note: The appliance runs on one R6 AA 1.5-volt battery (included).
Preferably use Philips alkaline batteries. A new AA alkaline battery has an
operating time of up to 2 hours.
4 Slide the battery compartment cover back onto the handle.
5 Turn the battery compartment cover anticlockwise until the locking
indicator points to the 'locked' indication.
To avoid damage due to battery leakage:
- do not expose the appliance to direct sunlight.
- do not expose the appliance to temperatures higher than 35°C.
- remove the battery if you are not going to use the appliance for a
month or more.
- do not leave an empty battery in the appliance.
Attaching and detaching attachments
Note: The precision trimming head and precision shaving head can be attached
and detached in the same way.
1 To attach one of the attachments, align the locking indicator with the
'unlocked' indication and put the attachment on the handle. Then
turn the attachment clockwise until the locking indicator points to
the 'locked' indication (I).
2 To detach the attachment turn it anticlockwise until the locking
indicator points to the 'unlocked' indication. Then pull the attachment
off the handle.