Honeywell HWM440 Série Guide D'utilisation page 4

SETTING UP YOUR HUMIDIFIER
1. Remove packaging materials. Keep this Owner's Manual for reference.
2. Remove twist tie from power cord and extend power cord to full length.
3. Ensure proper assembly. Remove tape from Water Level Float (C). Make sure Mist
Chimney (A), Heating Element Cover (B) and Water Level Float (C) are securely in
place. See Reassembling instructions after Cleaning your Humidifier section for
reference.
4. Place humidifier on a firm, level, water resistant surface a minimum of 12 inches
(30 cm) from walls. Steam should be directed away from any walls, bedding, and
furniture.
WARNING : KEEP OUT OF REACH OF CHILDREN. THIS PRODUCT PRODUCES
HOT STEAM AND SHOULD BE PLACED IN AN AREA NOT ACCESSIBLE TO
CHILDREN OR PETS, WITH THE POWER CORD OUT OF REACH.
FILLING / REFILLING
Pour up to 1.5 gallons of water into the Fill Area.
Max Fill Line
USING THE ESSENTIAL OIL CUP
This humidifier features an Essential Oil Cup that can be used with your favorite essential oil or liquid inhalant
(like Vicks Vaposteam®) for added enjoyment. This is not a diffuser - the oil does not come in contact with water
but is passively evaporated into the air. Essential oil and inhalant are not included.
1
1. Add a few drops of essential oil or liquid inhalant in the Cup.
WARNING: DO NOT pour any liquids into the Water Tank or Mist Outlet. DO NOT ADD LIQUID
INHALANTS, ESSENTIAL OILS OR ANY ADDITIVES TO THE WATER. DOING SO CAN HAVE ADVERSE
EFFECTS ON THE HUMIDIFIER AND VOID THE WARRANTY.
2. To clean the Essential Oil Cup, ensure the humidifier is off, unplugged, and cooled for at least 20 minutes then
gently wipe residue from the Essential Oil Cup.
DO NOT add
essential oil or liquid
inhalant to the
Water Tank.
2
DO NOT Pour Here
Pour Here
4
3
A
C
B
4