Care And Cleaning; Troubleshooting; Light Distribution - Commercial Electric 56507112 Guide D'utilisation Et D'entretien

Care and Cleaning

CaUTIOn: Before attempting to clean the fixture, disconnect the power to the fixture by turning the breaker off or removing the fuse from
the fuse box.
□
Clean the fixture with a soft, dry cloth.
□
Do not use cleaners with chemicals, solvents, or harsh abrasives.
□
Do not use liquid cleaner on the LEDs, LED driver, or wiring inside the light fixture.

Troubleshooting

WarnInG: Before doing any work on the fixture, disconnect power to the light fixture.
Minor problems often can be fixed without the help of an electrician.
Problem
The fixture will not light.
The fuse blows or the
circuit breaker trips when
the light is turned on.

Light distribution

Possible Cause
The power is off.
The circuit breaker is off.
There is a bad connection.
There is a defective switch.
The wires are crossed or the
power wire is grounding out.
-150
-120
-90
-60
-30
AVERAGE BEAM ANGLE(50%):118.9 DEG
Ensure the power supply is on.
Ensure the circuit breaker is in the on position.
Check to ensure proper wire connections are made.
Contact a qualified electrician.
Contact a qualified electrician.
Check the wire connections.
Contact a qualified electrician or call Commercial
Electric customer service 1-877-527-0313.
-/+180
150
0
170
340
510
680
30
850
0
8
Solution
120
90
60
UNIT:cd UNIT:cd UNIT:cd UNIT:cd
C0/180,114.6
C30/210,118.5
C60/240,120.9
C90/270,121.7