Making The Electrical Connections - Commercial Electric 56507112 Guide D'utilisation Et D'entretien

Installation (continued)
3
Feeding the wires
□
Feed the electrical connection wires through any knock out hole and then through the mounting
bracket (AA). The connection wires can be held in place by the metal tabs, if needed.
Knock out holes
4
Making the electrical
connections
□
Insert the hot and neutral (black and white)
wires from the electrical box into the wire
connectors of the same color wires from the
housing (A).
□
Insert the ground wire from the electrical box
into the wire connector attached to the green
wire from the housing (A).
AA
Metal tabs
Wire
connectors
AA
A
5
Attaching the mounting bracket
to the electrical box
□
Position the wires back inside the electrical box.
□
Mount the mounting bracket (AA) to the electrical
box using the two electrical box screws (BB).
BB
5
Please contact 1-877-527-0313 for further assistance.
Wire
connectors
AA
HOMEDEPOT.CA